Loading... Please wait...
Confetti by FlutterFETTI

9 Barrel "POD" Remote Control Flutter FETTI® Confetti Launcher (Call for Rental or Purchase Price)

  • Image 1
Price:
$6,000.00
Shipping:
Calculated at checkout
*Need Date:


Product Description

 

The 9-Barrel POD Remote Control Confetti Launcher


Rental Price - $ Rental prices vary considering which products you load into the confetti launcher barrels. Please call for rental pricing.

Purchase Price - $ 6,000 (Includes the Pod Base, the 9-Launcher Barrels, the Road Case, and the Control Unit).

Please watch the video to see the 9-Barrel POD in action.

Our 9-Barrel POD remote confetti cannon will shoot our 2" x 40' large streamer and confetti products 85' into the air in various pre-programmed sequences. If you're looking for a safe substitute for fireworks, this 9-Barrel POD electric confetti shooter is your answer! A programmable, on-board micro-processor can be programmed to fire off all the barrels at once or in a staggered firing configuration. You can even link POD units together for extended programs.

If your ceilings aren't that high, then we can load the 9 barrels with our speed load tubs of products, and they will go 35' high in the POD. Whatever you load into this remote confetti cannon, we GUARANTEE the 9-Barrel POD will excite your audience with this incredible electric confetti shooter.

 

Confetti Launcher Accessories Required for Use:

 

- 18-18" Speed Load tubes of products or 36-9" Speed Load tubes of products or 9-bags filled with 15 of our large streamer products. or our large individual streamers which come in poly bags for you to load into the 9 barrels.


- 9-12 gram threaded Co2 cylinders


- The 9-Barrel POD and all the confetti/streamer products for use in it are all MADE IN THE USA.

 


INSTRUCTIONS FOR USE

 LOADING THE LAUNCHER BARRELS

 

Step 1– Put the gray foam lifting seal into the bottom of the launcher barrel.

 

Step 2– Remove the caps from both ends of the speed load tubes filled with confetti and streamer products. NOTE – We recommend filling the launchers with either 2-18” Speed Load tubes of products or 4-9” Speed Load tubes of product. If you are loading the launcher barrel with individual streamers BE SURE TO REMOVE THE TAPE FROM EACH STREAMER BEFORE YOU LOAD IT INTO THE BARREL.

 

Steps 3– Place the cardboard compression cap over the mouth of the barrel.

 

Step 4– Using the launcher tape, take a 5” – 6” strip and tape around the outside diameter, being careful to tape smoothly so there are no air bubbles. DO NOT tape across the top of the cap.

 

FIRING THE LAUNCHERS

 

Step 5- Lift the levers on the quick connect coupler on the launching unit. Insert the barrels into the quick connect coupler. Push down on the quick release levers locking the barrel into the proper position. Double-check the connectors so that they are securely fastened and locked.

 

Step 6– Connect the cables to each of the 9 barrels to the push button launching system.

 

Steps 7 Step 8– Screw in the 16 gram threaded Co2 cylinder for each of the (9) nine barrels. Keep screwing quickly until the cylinder is cold. NOTE- Screw in the Co2 as close to Showtime as possible.

 

Step 9- Plug in the control box to the AC power source. Check that the control switch is OFF. Attach one end of the cable to the push button box and the other to the plug in unit at the pod.

 

Step 11- When ready to launch push the firing buttons.

 

Please call Jon Stern 24/7 for free technical assistance on using the 9 Barrel POD.

His cell number is 504-251-6312.

- PLEASE DO NOT KEEP THE 9-Barrel POD Control Unit PLUGGED IN.

- ONLY PLUG IT IN WHEN YOU ARE READY TO FIRE THE BARRELS OFF.

- CAUTION – DO NOT AIM OR POINT THE LAUNCHER BARRELS AT ANYONE.

- NOTE – ALSO, IF YOU BREAK ANY PIECES OF THE LAUNCHER PLEASE LET US KNOW. THANK YOU.

- DO NOT SHIP ANY CO2 CYLINDERS BACK IN THE BOX.

 

DO YOU WORK IN THE EVENT INDUSTRY? IF SO, PLEASE CALL US TOLL FREE 877-321-1999 (OUT OF THE U.S. 504-522-0300) FOR WHOLESALE PRICING FOR THE ABOVE PRODUCT.

ALL ORDERS RECEIVED AFTER 3:00 P.M. CENTRAL STANDARD TIME WILL BE PROCESSED ON THE NEXT BUSINESS DAY. 

Caution: Do not fire confetti launchers loaded with Metallic Streamers outside over telephone wires, for our PVC streamers conduct electricity. If our streamers land on 2 power lines, you run the risk that they may short out the nearest fuse or transformer. If you want to shoot streamers outside, please use our 2" X 40' Tissue Streamers or our 18" speed load tubes of tissue streamers, which are flame proof.

Disclaimer: Note some confetti products are colored with dye that may stain if they come become damp or wet. Please remove wet confetti immediately upon discharge.

© 2019 Parti Line International, LLC. All Rights Reserved

 

Find Similar Products by Category



All prices are in USD Copyright 2019 Flutter FETTI Confetti & Streamers.
Disclaimer: Note some confetti products are colored with dye that may stain if they come become damp or wet. Please remove wet confetti immediately upon discharge.