Please watch the video above to see the Master Blaster in action!
The Best Confetti Blaster
If you need a powerful handheld confetti blaster that can easily be re-positioned, the Master Blaster Co2 Confetti Launcher is exactly what you’re looking for. Measuring at just 42”, the setup requires only the blaster launcher barrel, confetti or streamer products, a compression cap, compression tape` and a 16-gram Co2 cylinder. Launch confetti, reload, and repeat – easy as that!
Plus watch the Instructions for Use video to see how to load and shoot the launcher.
The master of all ceremonies – our Master Blaster Co2 Confetti Launcher is totally versatile as it’s a hand-held launcher that can be positioned anywhere you need it during your event! One of the Master Blaster’s biggest strengths is how quickly and easily it can be moved to another location last-minute. This gives you the freedom to use our confetti blaster as you like, letting you adjust on the fly so that you’ll be able to successfully launch your confetti or streamer products even when last-minute problems arise (like wind direction). The Master Blaster is very lightweight and easy to carry, which means just about anyone can carry it.
The trigger unit on our Master Blaster has one of our U.S. patented #10,222,169 B2 new piercing units which allows greater strength to blow our products further, plus it allows you to screw in the Co2 cylinder many hours before use without leaking.
INSTRUCTIONS FOR USE
LOADING THE LAUNCHER BARREL
Step 1– Remove the caps from both ends of the speed load tubes.
Step 2 –Put the contents of the speed load tubes into the barrel of the launcher. (Note, use either 2-18” speed load tubes or 4-9” speed load tubes.)
Step 3 – Place the cardboard compression cap over the mouth of the barrel.
Step 4 –Using the launcher tape, take a 5” – 6” strip and tape around the outside diameter, being careful to tape smoothly so there are no air bubbles. DO NOT tape across the top of the cap.
FIRING THE LAUNCHER
Step 5 – Be sure the lever on the trigger is in the (horizontal) position. Insert 1- 16-gram threaded Co2 cylinder into the brass-piercing unit at the bottom of the launcher barrel and screw it in until it tightens. Keep turning until it is totally tight. You may hear gas releasing as you screw in the Co2. If you do, continue screwing the cup until it is tightly screwed in and no Co2 is being released. The Co2 will feel cold once it is tightly screwed in.
Step 6 – Insert the barrel into the silver quick connect and it push down as far as it will go then lock the lever down. Now it is ready to fire.
Step 7 – Point the launcher up and at a slight angle. (If you are firing CORKSCREWS aim the launcher straight up into the air to get the correct spiraling effect). Quickly pull the lever down to the perpendicular position.
The confetti will discharge out of the launcher into a wonderful display of color and fun! The Co2 cylinders will ice over upon discharge.
CAUTION – DO NOT AIM OR POINT THE LAUNCHER BARRELS AT ANYONE.
Choose Your Streamers or Confetti
An awesome benefit of the Master Blaster is that you can choose to use either short streamers that will launch 25-40 feet in the air or large streamers that will go up to 85 feet into the air. It also shoots our 18-inch speed load tubes of Tissue Flutter FETTI confetti 25’- 30′ feet into the air.
Want to go sky high? We can double wrap our tissue Flutter FETTI confetti to fly up to 40′ into the air. Again, this adaptability gives you the ultimate control over your event and ensures that your audience will get to experience the magic of confetti and streamers. It can handle a variety of streamer and confetti types and sizes – from Metallic speed load tubes, large 2” X 40’ Tissue or Metallic streamers, Tissue Flutter FETTI, or other combinations, the choice is yours!.
Your Source for Fun
At Flutter FETTI, we love bringing FUN to events of all sizes! Our team of confetti experts are ready to assist you in any way, so please don’t hesitate to reach out to us. You can call at (877) 321-1999 or visit our Get A Quote page for more information. Please discuss the ceiling height and the size of your space with our Confettiologists to be sure you order the correct confetti launcher and accompanying products for your special event.
Act now and get this confetti blaster to create an epic experience! for your next event! You can rent or own it!
Our Master Blaster is made in the USA
ACCESSORIES REQUIRED FOR MASTER BLASTER USE:
4-9″ Speed Load tubes of Metallic confetti products or 2-18″ Speed Load tubes of Tissue Products or 15 -20 pieces of our large Tissue or Metallic Streamer Products
1″ Compression Cap
16 Gram Threaded Co2 Cylinder
NOTE – If you are using our products by the Gross or our large streamers to fill the Master Blaster, the paper tab will be on each streamer keeping the streamer closed in the bag. YOU MUST BREAK THE TAB before loading the Streamers into your launcher barrel, or it will not unroll in the air.
Caution: Do not fire our Co2 confetti launchers loaded with Metallic Streamers outside over telephone wires, for our PVC streamers conduct electricity. If our streamers land on 2 power lines, you run the risk that they may short out the nearest fuse or transformer. If you want to shoot streamers outside, please use our 2″ X 40′ Tissue Streamers or our 18″ speed load tubes of tissue streamers, both of which are flame-retardant.
WARNING: Do not point toward anyone when using.
Many Flutter FETTI products, when saturated with any liquid and under pressure, may bleed color, and Flutter FETTI® cannot guarantee or warranty that it will not do so. Please remove wet confetti immediately upon discharge. If any liquid will or may be present at an event, please consult with us so we can assist you in choosing water-safe FETTI® products.
NOTE – IF YOU ARE RENTING THE MASTER BLASTER AND IT CAME IN A CARDBOARD BOX PLEASE SAVE THE BOX YOU RECEIVED IT IN SO YOU CAN USE IT TO SHIP THE LAUNCHER BACK TO US. PLEASE REMOVE ALL USED AND UNUSED Co2 CYLINDERS BEFORE YOU SHIP THE LAUNCHERS BACK TO US.
DO NOT SHIP ANY Co2 CYLINDERS BACK IN YOUR BOX.
YOU HAVE PAID US ROUND TRIP SHIPPING FOR THE RENTAL OF THIS LAUNCHER. PLEASE CALL US TOLL FREE AT 877-321-1999 WHEN YOUR EVENT IS OVER AND WE CAN CALL FED EX FOR A PICKUP.
ALSO, IF YOU BREAK OR LOSE ANY PIECES OF THE MASTER BLASTER LAUNCHER PLEASE LET US KNOW.
FOR TECHNICAL ASSISTANCE – CONTACT JON STERN 24/7 AT (504) 251-6312
OUR RETURN ADDRESS IS:
FLUTTER FETTI® FUN FACTORY
9310 Ulmerton Rd Bldg 2 #300
Largo, Florida 33771
(504) 522-0300 – Fax (504) 522-0304
DO YOU WORK IN THE EVENT INDUSTRY? IF SO, PLEASE CALL US TOLL FREE 877-321-1999 (OUT OF THE U.S. 504-522-0300) FOR WHOLESALE PRICING FOR THE ABOVE PRODUCT.
© 2019 Parti Line International, LLC. All Rights Reserved
- Weight: 2.25 lb