Please watch the video on this page to see the Mega Blaster in action!
The Mega Blaster Hand-Held Co2 Launcher is designed to use 2″ poly bags of products and to give a fabulous full burst of confetti products into the air. We designed it so those of you who own our Master Blaster Launcher can use the same trigger unit with this launcher barrel.
Our piercing unit just received a U.S. Patent # because of its a unique design. Our competitors use an old fashioned pull ring piercing unit which provides very little power once the Co2 cylinder is pierced. The piercing unit for the Mega Blaster Launcher is 8” long and is one complete cylinder so it can’t leak. Once the Co2 cylinder is pierced the Co2 warms up in the cylinder and becomes much stronger giving this launcher the added strength to blow confetti products 30’ – 40’ high into the air spreading out approximately 15’- 20’.
Besides shooting Flutter FETTI confetti products, it shoots items like stress balls, stuffed animals and even hot dogs! A Real Crowd Pleaser! It also shoots our die-cut products like stars, rose petals and hearts. The whole visual idea of a silly thing like a hot dog flying into the crowd gets big smiles and chuckles from those we have spoken to. We get reports that the students and crowd LOVE IT!
This launcher requires lifting foam and a compression cap to really make the products fly high into the air. Have FUN using it at your event! And no, we don’t supply the hot dogs!!
– Rental Price $83.50
– Confetti Products and accessories are sold separately
– If you work in the Event Industry contact us for Wholesale Pricing
– Our Mega Blaster is made in the USA.
1 or 2 (2” X 10”) sleeves of Flutter FETTI products – Confetti or Streamers
1 bag of Compression Caps
1 Bag of Lifting Foam
1 roll of Compression Tape
1 -16 Gram threaded Co2 Cylinder per shot
INSTRUCTIONS FOR USE
Please watch this video to see how to load and operate the Mega Blaster Launcher
LOADING THE LAUNCHER BARREL
Step 1 – Cut open the poly bag and push the 2” lifting foam to the bottom of the launcher barrel. Then pour the contents (confetti or streamers) of the 2” X 10” sleeve into the launcher barrel.
Step 2 – Place the cardboard compression cap over the mouth of the barrel.
Step 3 – Using the launcher tape, take a 7” strip and tape around the outside diameter, being careful to tape smoothly so there are no air bubbles. DO NOT tape across the top of the cap.
FIRING THE LAUNCHER
Step 4 – Be sure the lever on the trigger is in the (horizontal) position. Insert 1 – 16-gram threaded Co2 cylinder into the brass-piercing unit at the bottom of the launcher barrel and screw it in until it tightens. Keep turning until it is totally tight. You may hear gas releasing as you screw in the Co2. If you do, continue screwing the cup until it is tightly screwed in and no Co2 is being released. The Co2 will feel cold once it is tightly screwed in.
Step 5 – Insert the barrel into the silver quick connect and it push down as far as it will go then lock the lever down. Now it is ready to fire.
Step 6 – Point the launcher up and at a slight angle. (If you are firing CORKSCREWS aim the launcher straight up into the air to get the correct spiraling effect). Quickly pull the lever down to the perpendicular position.
The confetti will discharge out of the launcher into a wonderful display of color and fun! The Co2 cylinders will ice over upon discharge.
CAUTION – DO NOT AIM OR POINT THE LAUNCHER BARRELS AT ANYONE.
– NOTE – IF YOU ARE RENTING THE MASTER BLASTER AND IT CAME IN A CARDBOARD BOX PLEASE SAVE THE BOX YOU RECEIVED IT IN SO YOU CAN USE IT TO SHIP THE LAUNCHER BACK TO US. PLEASE REMOVE ALL USED AND UNUSED Co2 CYLINDERS BEFORE YOU SHIP THE LAUNCHERS BACK TO US.
– DO NOT SHIP ANY Co2 CYLINDERS BACK IN YOUR BOX.
– IF YOU HAVE PAID US ROUND TRIP SHIPPING FOR THE RENTAL OF THIS LAUNCHER PLEASE CALL US TOLL FREE AT 877-321-1999 WHEN YOUR EVENT IS OVER AND WE CAN CALL FED EX FOR A PICKUP.
– ALSO, IF YOU BREAK OR LOSE ANY PIECES OF THE MASTER BLASTER LAUNCHER PLEASE LET US KNOW.
– FOR TECHNICAL ASSISTANCE – CONTACT JON STERN 24/7 AT (504) 251-6312
OUR RETURN ADDRESS IS:
FLUTTER FETTI® FUN FACTORY
9310 Ulmerton Rd Bldg 2 #300
Largo, Florida 33771
(504) 522-0300 – Fax (504) 522-0304
TO ORDER: Contact the Flutter FETTI Fun Factory
1-877-321-1999 or 504-522-0300
U.S. Patent #10,222,169 B2
© 2019 Parti Line International, LLC. All Rights Reserved
- Weight: 3.75 lb