Loading... Please wait...
Confetti by FlutterFETTI

Our Newsletter


Red Confetti Blower Instructions


Instructions For Use

1. Take the plastic tube which is 4 1/2" and insert over the black tip of the red blower. Next attach the TY piece on top of the 4 1/2" piece. Next insert the long plastic tube on top of this piece. Put the 2 1/2" piece on the TY piece. Then place the 90 degree elbow on top of the 2 1/2" piece. Then insert the last plastic piece. BE SURE ALL THE PIECES FIT SNUGGLY.

(Note, we have put together most of the above pieces for you but some pieces may come unattached during shipping. Consequently, we are including these assembly instructions above for your review.)

2. Plug in and turn on the red blower.

3. Carefully drop in the bulk confetti a hand full at a time just so the confetti doesn't get clogged in the smaller plastic tube. The confetti will flutter and float out of the longer plastic tube. Also, don't let confetti get clogged at the bottom of the blower or it won't work.

4. You can aim the blower in any direction you want so the confetti will fall over your staged area.

TO ORDER OUR RED CONFETTI CANNON, CONTACT FLUTTER FETTI at 1-877-321-1999 - FAX 504-522-0304.

Download the instructions



All prices are in USD Copyright 2019 Flutter FETTI Confetti & Streamers.
Disclaimer: Note some confetti products are colored with dye that may stain if they become damp or wet. Please remove wet confetti immediately upon discharge.