Do you work in the event industry?
If so, please call us toll free 877.321.1999 (out of US: +1.504.522.0300) for wholesale pricing for the above and other products.
About the Product
MASTER BLASTER "HANDHELD" Co2 CONFETTI LAUNCHER
42" LONG BARREL WITH A TRIGGER UNIT
MADE IN THE USA
- Rental Price $84.00
- Price $230.00
- Co2 Confetti Launcher Products for Accessories
A VERSATILE CONFETTI LAUNCHER - THE BEST HANDHAND LAUNCHER IN THE INDUSTRY
If you need a powerful handheld confetti blaster that can easily be repositioned, the Master Blaster Co2 Confetti Launcher is exactly what you’re looking for. Measuring at just 42”, the setup requires only the blaster launcher barrel, confetti or streamer products, a compression cap, compression tape and a 16-gram Co2 cylinder. Launch confetti, reload, and repeat - easy as that!
Please watch the video above to see the Master Blaster in action!
Plus watch the Instructions for Use video to see how to load and shoot the launcher.
Versatile Power
The master of all ceremonies – our Master Blaster Co2 Confetti Launcher is totally versatile as it’s a hand-held launcher that can be positioned anywhere you need it during your event! One of the Master Blaster’s biggest strengths is how quickly and easily it can be moved to another location last-minute. This gives you the freedom to use our confetti blaster as you like, letting you adjust on the fly so that you’ll be able to successfully launch your confetti or streamer products even when last minute problems arise (like wind direction). The Master Blaster is very lightweight and easy to carry, which means just about anyone can carry it.
The trigger unit on our Master Blaster has one of our U.S. patented #10,222,169 B2 new piercing units which allows greater strength to blow our products further, plus it allows you to screw in the Co2 cylinder many hours before use without leaking. Plus this same trigger unit can be used with our Mega Blaster Launcher which has a 2" barrel allowing you to use the wide variety of Flutter FETTI products at your events.
The Master Blaster Launcher can use a wide variety of our 2 - 18" Speed load tubes of Flutter FETTI products or it can use our larger streamer products like our 2" X 40' long Metallic or Tissue Streamers which can shoot the streamers 85'-90' high into the air. We recommend this launcher for outdoor events since the wind is always your enemy when shooting confetti or streamers outside. This launcher provides our clients to quickly move their position at outdoor events depending on the environmental adjustments which might need to be quickly made. Our Master Blaster Launcher is handmade in our factory in the USA.
You can rent or purchase our Master Blaster Launcher. If you rent it and love it we'll apply the rental price to the purchase price. Just let us know.
Accessories Needed:
- 1 or 2 (2” X 10”) sleeves of Flutter FETTI products - Confetti or Streamer products
- 1 bag of 1 1/4"Compression Caps (20 caps per bag.)
- 1 Bag of Lifting Foam (20 pieces of lifting foam per bag.)
- 1 roll of Compression Tape
- 1 -16 Gram threaded Co2 Cylinder per shot
ALL ORDERS RECEIVED AFTER 3:00 P.M. Eastern Time (ET) WILL BE PROCESSED ON THE NEXT BUSINESS DAY.
Remember to check your shipping box when it arrives for the "CERTIFIED FLUTTER FETTI® PRODUCT STICKER" on the outside of the box. To be sure it’s an authentic Flutter FETTI product.
Caution:
Do not fire our launchers loaded with Metallic streamers outside over telephone wires, for our PVC streamers conduct electricity. If our streamers land on 2 power lines, you run the risk that they may short out the nearest fuse or transformer. If you want to shoot streamers outside, please use our 2" X 40' Tissue Streamers or our 18" speed load tubSo Ses of tissue streamers, both of which are flame proof.
Products By the Gross:
If you are using our products by the Gross to fill the Quarter Turn launcher, the paper tab will be on each streamer keeping the streamer closed in the bag. YOU MUST BREAK THE TAB before loading the Streamers by the gross into your launcher barrel, or it will not unroll in the air.
All prices are in USD Copyright 2022 Flutter FETTI Confetti & Streamers.
Instructions For Use
Our Master Blaster Hand Held Co2 Launcher is MADE in the USA
LOADING THE LAUNCHER BARREL
Step 1 –Remove the caps from both ends of the 4 - 9" or 2 - 18" speed load tubes. If you're loading the launcher barrel with our Stadium Streamers, Streamers with Bubbles, Streamers with FETTI® FETTI Strips or Streamers by the Gross you MUST REMOVE the piece of tape on the streamers BEFORE YOU LOAD THEM INTO THE LAUNCHER BARREL
Step 2 –
LIFTING FOAMIf you're shooting Tissue Flutter FETTI, Metallic Flutter FETTI or Metallic Streamers we recommend you FIRST INSERT LIFTING FOAM into the bottom of the barrel.If you're shooting Tissue Streamers in the barrel there is NO NEED to use the lifting foam.
Step 3 –Put the contents of the PRODUCTS LISTED ABOVE into the barrel of the launcher.
Step 4 – Place the cardboard compression cap over the mouth of the barrel.
Step 5 – Using the PAPER launcher tape, take a 5” – 6” strip and tape around the outside diameter, being careful to tape smoothly so there are no air bubbles. DO NOT tape across the top of the cap.
FIRING THE LAUNCHER
Step 5 –Be sure the lever on the trigger is in the (horizontal) position. Insert 1- 16 gram threaded Co2 cylinder into the aluminum -piercing unit at the bottom of the launcher barrel and screw it in until it tightens. Keep turning until it is totally tight. You may hear gas releasing as you screw in the Co2. If you do, continue screwing the cup until it is tightly screwed in and no Co2 is being released. The Co2 will feel cold once it is tightly screwed in. NOTE, We received a U.S. Patent #10,222,163 on our piercing unit because they won't leak. Our piercing unit is the ONLY piercing unit in the industry which has a U.S. Patent on it so it will work everytime.
Step 6 –Insert the barrel into the silver quick connect and and push it down as far as it will go then lock the two levers down. After you close the 2 levers drop the 2 pins into the holes on the sides of the lever to securely lock the levers in. Now it is ready to fire.
Step 7 – Point the launcher up and at a slight angle. (If you are firing CORKSCREWS aim the launcher straight up into the air to get the correct spiraling effect). Quickly pull the lever down to the perpendicular position. The confetti or streamers will discharge out of the launcher into a wonderful display of color and fun! The Co2 cylinders will ice over upon discharge.
Caution: Do not fire our Co2 confetti launchers loaded with Metallic Streamers or Metallic FETTI outside over telephone wires, for our PVC will conduct electricity. If our streamers of confetti land on 2 power lines, you run the risk that they may short out the nearest fuse or transformer. If you want to shoot confetti or streamers outside, please use our 2" X 40' Tissue Streamers or our 18" speed load tubes of tissue streamers or confetti, both of which are flame-proof.
REMEMBER - If you are using our products by the Gross or our Large Streamers to fill the Master Blaster, the paper tab will be on each streamer keeping the streamer closed in the bag. YOU MUST BREAK THE TAB before loading the Streamers into your launcher barrel, or they will not unroll in the ai
WARNING: Do not aim or point the launcher barrel toward anyone when using.
RETURN INSTRUCTIONS
NOTE – IF YOU ARE RENTING THE MASTER BLASTER AND IT CAME IN A CARDBOARD BOX PLEASE SAVE THE BOX YOU RECEIVED IT IN SO YOU CAN USE IT TO SHIP THE LAUNCHER BACK TO US. PLEASE REMOVE ALL USED AND UNUSED Co2 CYLINDERS BEFORE YOU SHIP THE LAUNCHERS BACK TO US.
DO NOT SHIP ANY Co2 CYLINDERS BACK IN YOUR BOX.
YOU HAVE PAID US ROUND TRIP SHIPPING FOR THE RENTAL OF THIS LAUNCHER. PLEASE CALL US TOLL FREE AT 877-321-1999 WHEN YOUR EVENT IS OVER AND WE CAN CALL FEDEX FOR A PICK UP.
ALSO, IF YOU BREAK OR LOOSE ANY PIECES OF THE MASTER BLASTER LAUNCHER PLEASE LET US KNOW.
FOR TECHNICAL ASSISTANCE – CONTACT JON STERN 24/7 AT (504) 251-6312
OUR RETURN ADDRESS IS:
FLUTTER FETTI® FUN FACTORY
9310 Ulmerton Rd Bldg 2 Suite #300
Largo, Florida 33771
(504) 522-0300 – Fax (504) 522-0304
TOLL FREE 877-321-1999
Choose Your Streamers or Confetti
An awesome benefit of the Master Blaster is that you can choose to use either short streamers that will launch 25-40 feet in the air or large streamers that will go up to 85 feet into the air. It also shoots our 18-inch speed load tubes of Tissue Flutter FETTI confetti 25’- 30' feet into the air.
Want to go sky high? We can double wrap our tissue Flutter FETTI confetti to fly up to 40′ into the air. Again, this adaptability gives you the ultimate control over your event and ensures that your audience will get to experience the magic of confetti and streamers. It can handle a variety of streamer and confetti types and sizes - from Metallic speed load tubes, large 2” X 40’ Tissue or Metallic streamers, Tissue Flutter FETTI, or other combinations, the choice is yours!.
Your Source for Fun
At Flutter FETTI, we love bringing FUN to events of all sizes! Our team of confetti experts are ready to assist you in any way, so please don’t hesitate to reach out to us. You can call at (877) 321-1999 or visit our Get A Quote page for more information. Please discuss the ceiling height and the size of your space with our Confettiologists to be sure you order the correct confetti launcher and accompanying products for your special event.
Act now and get this confetti blaster to create an epic experience! for your next event! You can rent or own it!